Insert Landing

Used to insert a landing between two selected points on a straight run of a stair.

Accessed from:

Ribbon: Building Design > Modify > Modify > Slope split button > Insert Landing

There is flexibility with adding landings to stairs between the required portions of a run.

Landing insertion between 1st and 2nd points selected on a stair flight

To insert a landing, invoke the tool preferably in 3D view, and select the first landing point, then move along the straight run and enter next data point to finish. You can insert a landing at the start and end of a single flight of straight stairs.

Insert landing allows creation of top or bottom landings too:

Bottom landing: Select data point at the bottom of first step
Top landing: Select data point at the top of last step

Landing should be added in same flight area and of considerable walk length. You can add a maximum of 3 landings to a stair.

Stairs having handrail associated with them will reform the railing geometry that matches with the newly inserted landing in the stair.

Key-in: TFPLACE STAIRLANDING